Add instructions for setting TDP at boot

scripts/README.md

@@ -48,3 +48,19 @@ tdp c -d
 ```
 
 *Protip:* Add `tdp check` to the end of your `.bashrc` file. Then your terminal will display the TDP every time it's opened, without needing to run any command.
+
+### Setting TDP at boot
+
+Copy `tdp-set.service` into `/etc/systemd/system/`
+
+Edit `/etc/systemd/system/tdp-set.service` and edit the `ExecStart=` line so it points to your tdp script, and type in your preferred wattage at the end.
+
+
+Enable the service:
+
+```
+sudo systemctl deamon-reload
+sudo systemctl enable tdp-set.service
+```
+
+Reboot your Win 3, then run `tdp check` to verify that TDP was set correctly.

scripts/tdp-set.service

@@ -0,0 +1,8 @@
+[Unit]
+Description=Sets GPD Win 3 TPD at boot
+
+[Service]
+ExecStart=/replace/this/path/to/scirpts/tdp set 12
+
+[Install]
+WantedBy=multi-user.target