Update 'scripts/README.md'

scripts/README.md

@@ -4,27 +4,41 @@ A collection of scripts for the GPD Win 3. Mostly to minimize the reuqired typin
 
 To install scripts, copy them somewhere on your Win 3, then add them to your path. This is done by adding a line to the end of `~/.bashrc`  
 
-## Quickstart
+### Quick install
 
-To quickly install the scripts, make sure `git` is installed and run this in a terminal:
+To quickly install the scripts, paste this block into a terminal on your GPD Win 3:
 
 ```bash
+if [ -z $(which git 2>/dev/null) ]; then
+  printf "\n$(tput setaf 1)-- We didn't find git! Is it installed? --$(tput sgr0)\n\n"
+  printf "On Ubuntu and similar distros, git can be installed with the following command:\n"
+  printf "  $(tput setaf 2)sudo apt install git$(tput sgr0)\n\n"
+  printf "Please try again after installing git.\n\n"
+else
+  printf "$(tput setaf 2)-- Installing scripts --$(tput sgr0)\n"
   mkdir -p ~/.local
   git clone https://gitea.quad.moe/quad/win3-resources.git ~/.local/gpd-win3
   echo -e "\n# GPD Win 3 scripts\nPATH=\"\${PATH}:\${HOME}/.local/gpd-win3/scripts\"" >> ~/.bashrc
-# This last line is optional. It displays your TDP every time you open a terminal
   echo "tdp check" >> ~/.bashrc
+  printf "$(tput setaf 2)-- Install finished. Please open a new terminal to use the scripts --$(tput sgr0)\n"
+fi
 ```
 
-Then restart your terminal. Run `tdp check` to test if it's working. It should report back current TDP.
+To update, run:
+
+```bash
+cd ~/.local/gpd-win3 && git pull && cd -
+```
+
+### Manual install
+
+- Clone the repository somewhere
+- Ensure the scripts folder is in your PATH
+- (Optional) add `tdp check` to your .bashrc, which will display TDP every time you open a terminal
 
 ## TDP
 
-Lets you set the TDP using `intel_rapl`. Tested on Ubuntu 21.04.  
-Also supports shortened commands for minimal typing on the mediocre keyboard.
-
-PL1 is set to number provided, PL2 is set 2W higher, maybe PL2 will be customizable in the future.  
-You will have to enter your sudo password when changing TDP.
+Lets you set the TDP using `intel_rapl`.
 
 Common TDPs are:
 - 8W (Ultra-low power, mostly just 2D games)
@@ -33,44 +47,51 @@ Common TDPs are:
 - 20W (High perf)
 - 30W (Max perf)
 
+By default, PL2 (short-term peak) will be 2W higher than PL1.
+
 For details on how to use, run `tdp help`.
 
-Common examples:
+Example commands:
 
 ```bash
-# Check current TDP
+# Print help
+tdp help
+
+# Check TDP
 tdp check
+tdp c
 
 # Set TDP to 8W
 tdp set 8
-
-# Set TDP to 8W (Shortened)
 tdp s 8
 
+# Set both PL1 and PL2 to 15W
+tdp set 15 --same --detail
+tdp s 15 -s -d
+
 # Check both PL1 and PL2
 tdp check --detail
-
-# Check both PL1 and PL2 (Shortened)
 tdp c -d
 ```
 
-*Protip:* Add `tdp check` to the end of your `.bashrc` file. Then your terminal will display the TDP every time it's opened, without needing to run any command.
-
 ### Setting TDP at boot
 
-Copy `tdp-set.service` into `/etc/systemd/system/`
+Install the service using the following command: `cp ~/.local/gpd-win3/scripts/tdp-set.service /etc/systemd/system/`
 
-Edit `/etc/systemd/system/tdp-set.service` and change the `ExecStart=` line so it points to your tdp script, and type in your preferred wattage at the end.
+Run `nano /etc/systemd/system/tdp-set.service` and edit the `ExecStart=` line so it points to the correct place and enter the TDP you want at the end:
 
+```
+ExecStart=/home/<username>/.local/gpd-win3/scripts/tdp set 12
+```
 
 Enable the service:
 
-```
+```bash
 sudo systemctl deamon-reload
 sudo systemctl enable tdp-set.service
 ```
 
-Reboot your Win 3, then run `tdp check` to verify that TDP was set correctly.
+Reboot your Win 3, then run `tdp check` to check that TDP was set correctly.
 
 ## Touch fix